THE PRECISION HYBRID

Build your most forgiving, high flying iron set of all time – with the latest JPX Fli-Hi. Using the JPX Fli-Hi you can replace your strongest lofted irons for more practical distance gaps at the longer end of the set. Weight is located internally on the back side to encourage a draw bias in addition to higher launch. The JPX Fli-Hi can be included within a custom iron set, with the same shafts.

HIGH DRAW BIAS

New internal weighting specifically adds spin to the stronger lofts

17-4 STAINLESS STEEL FACE AND 431 SS BODY

Allows for a high energy club face as well as a soft bendable softer hosel for custom adjustments.

CONSISTENT BALLS SPEEDS

A re-engineered Wave Sole expands the CORAREA, especially lower on the face.

PRACTICAL DISTANCE GAPS

Combination of better loft gaps, shaft length, and head design means that every loft delivers a different outcome.

MIZUNO PRO 245 - TOUR SPEED AND LAUNCH

The Mizuno Pro 245 is measurably quicker again from the face than the Mizuno Pro 243 but also easier to launch – due to a complex hollow body construction and internally suspended Tungsten weight.

Packed into a staggeringly sleek chassis, the Mizuno Pro 245 showcases more than any model how rapidly Mizuno’s Grain Flow Forged process has evolved.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

One piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

HOLLOW BODY GFF 4135 CHROMOLY FACE AND NECK (2-8 IRON)

With multi-thickness face configuration and laser welded 431 Stainless steel back piece for elevated ball speeds and launch.

INTERNAL TUNGSTEN WEIGHTING (2-7 IRON)

A 46g Tungsten weight is key to delivering improved launch, but is suspended to enable the sole to flex (key to faster ball speeds).

SOFT COPPER UNDERLAY

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the sensational feel of our Grain Flow Forged heads.

A mid-sized, full body Grain Flow Forged iron delivering a perfect balance of ball speed, stability, and feel. Our 3rd generation of Chromoly Forging (4-7 iron) incorporates a milling slot that extends wider to heel and toe.

3rd GEN FORGED CHROMOLY WITH WIDER MICROSLOT

Forged from a single billet of 4120 Chromoly and back milled from to heel and toe, creates extreme ball speeds from a compact workable profile. Face thickness is now reduced to just 2.2 mm behind impact (vs 2.6mm JPX921Forged) .

1025E PURE SELECT MILD CARBON STEEL

For ultimate precision, and control, and feel in the scoring zone.

NEW V-CHASSIS FOR THINNER TOPLINE

Engineered via Mizuno’s ‘Harmonic Impact Technology’ project to create a dense, more satisfying feel at impact. Prior models required a slightly thicker topline to maintain feel.

MORE BEVELLED TRAIL EDGE

Additional bevelling to the trailing edge for immaculate turf interaction.

REFINED SCORING IRONS

Noticeably shorter blade length and more compact from 7 iron to GW - for precision where most needed.

WHITE-SATIN BRUSH

Non reflective, Chrome plated finish to reduce bright light glare.

FORGED IN HIROSHIMA JAPAN

One-piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's iconic facility in Hiroshima, Japan – where Mizuno irons have been produced since 1968.

MIZUNO PRO 245 - TOUR SPEED AND LAUNCH

The Mizuno Pro 245 is measurably quicker again from the face than the Mizuno Pro 243 but also easier to launch – due to a complex hollow body construction and internally suspended Tungsten weight.

Packed into a staggeringly sleek chassis, the Mizuno Pro 245 showcases more than any model how rapidly Mizuno’s Grain Flow Forged process has evolved.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

One piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

HOLLOW BODY GFF 4135 CHROMOLY FACE AND NECK (2-8 IRON)

With multi-thickness face configuration and laser welded 431 Stainless steel back piece for elevated ball speeds and launch.

INTERNAL TUNGSTEN WEIGHTING (2-7 IRON)

A 46g Tungsten weight is key to delivering improved launch, but is suspended to enable the sole to flex (key to faster ball speeds).

SOFT COPPER UNDERLAY

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the sensational feel of our Grain Flow Forged heads.

MIZUNO PRO FLI-HI - TOUR LONG IRON

The Mizuno Pro Fli-Hi has become a fixture with the majority of Mizuno’s tour players. An easy launching, powerful long iron replacement that flows seamlessly into either the Mizuno Pro 241, 243 or 245 full iron set.

With a chassis now fully upgraded to 4335+ Nickel Chromoly for elevated ball speeds.

INTERNAL TUNGSTEN WEIGHTING

23 grams of weight low in the head for elevated launch compared to traditional long irons.

NICKEL CHROMOLY 4335+ HOLLOW BODY CONSTRUCTIONS

Utilizing a heat-treated multi-thickness face for elevated average ball speeds, with a more pliable body and bendable hosel.

OFFSET FACE WELD

Placing the weld line inside the upper face-gauge allowed a thinner topline. On the bottom edge, the weld line is back from the face, allowing greater flex and ball speeds from low on the face.

BLACK ION FINISH

Fully blacked-out plating creates the illusion of a more compact profile.

A mid-sized, full body Grain Flow Forged iron delivering a perfect balance of ball speed, stability, and feel. Our 3rd generation of Chromoly Forging (4-7 iron) incorporates a milling slot that extends wider to heel and toe.

3rd GEN FORGED CHROMOLY WITH WIDER MICROSLOT

Forged from a single billet of 4120 Chromoly and back milled from to heel and toe, creates extreme ball speeds from a compact workable profile. Face thickness is now reduced to just 2.2 mm behind impact (vs 2.6mm JPX921Forged) .

1025E PURE SELECT MILD CARBON STEEL

For ultimate precision, and control, and feel in the scoring zone.

NEW V-CHASSIS FOR THINNER TOPLINE

Engineered via Mizuno’s ‘Harmonic Impact Technology’ project to create a dense, more satisfying feel at impact. Prior models required a slightly thicker topline to maintain feel.

MORE BEVELLED TRAIL EDGE

Additional bevelling to the trailing edge for immaculate turf interaction.

REFINED SCORING IRONS

Noticeably shorter blade length and more compact from 7 iron to GW - for precision where most needed.

WHITE-SATIN BRUSH

Non reflective, Chrome plated finish to reduce bright light glare.

FORGED IN HIROSHIMA JAPAN

One-piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's iconic facility in Hiroshima, Japan – where Mizuno irons have been produced since 1968.

The Mizuno M.CRAFT OMOI #2 Putter is a plumber’s neck blade with 40-degree of toe hang and full shaft offset.

Forged from premium 1025 carbon steel and CNC milled, using all the successful fundamentals of the original M-Craft models, the OMOI putters feature a heavier head weight to increase MOI for improved stability.

The OMOI achieved its new stability by taking a view of the entire club – balancing out the increased head weight with a lighter weight grip and shaft to shift the club’s CG and help control face rotation through the putting stroke.

Every putter also comes with an additional weight kit – including a pair of 3g and 13g weights interchangeable with the 8g fitted as standard.

FEATURES AND BENEFITS: 

• Forged and CNC Milled from 1025 mild carbon steel
  For incredible precision and feel. Deep face milling creates a softer feel and pure roll. 
• Heavier head weight with dual weight ports 
  At a weighty 370 grams (#1, #2) and 383 grams (#3), OMOI putters offer increased MOI for added stability.
• Additional weights allow for fine-tuning of swing-weight
  Includes two 3-gram weights, two 13-gram weights and a tool.  Interchangeable with the 8-gram fitted weights. 
• Available in three finishes
  Choose from three stunning finishes: New Double Nickel, bold Blue ION or intense Black ION.
• Lights out. Black Out. 
  With KBS Tour Black Ion-plated shaft, Lamkin OMOI Sink Fit Pistol grip and upgraded blacked-out M.Craft headcover. 

M-CRAFT OMOI SPECIFICATION

MIZUNO PRO 245 - TOUR SPEED AND LAUNCH

The Mizuno Pro 245 is measurably quicker again from the face than the Mizuno Pro 243 but also easier to launch – due to a complex hollow body construction and internally suspended Tungsten weight.

Packed into a staggeringly sleek chassis, the Mizuno Pro 245 showcases more than any model how rapidly Mizuno’s Grain Flow Forged process has evolved.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

One piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

HOLLOW BODY GFF 4135 CHROMOLY FACE AND NECK (2-8 IRON)

With multi-thickness face configuration and laser welded 431 Stainless steel back piece for elevated ball speeds and launch.

INTERNAL TUNGSTEN WEIGHTING (2-7 IRON)

A 46g Tungsten weight is key to delivering improved launch, but is suspended to enable the sole to flex (key to faster ball speeds).

SOFT COPPER UNDERLAY

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the sensational feel of our Grain Flow Forged heads.

MIZUNO PRO 243 - TOUR SPEED

The Mizuno Pro 243 is a manufacturing masterpiece – more compact and precise than its predecessor, yet faster from the face and more satisfying at impact.

Improvements in performance only made possible through the long-term relationship between Mizuno’s R&D team and its exclusive Grain Flow Forging plant in Hiroshima, Japan.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

From a single billet at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the sensational feel of our Grain Flow Forged heads. Applied to closely match the vibration patterns identified with a soft muscle-back feel.

4120 CHROMOLY WITH FLOW MICROSLOT (4-7 IRON)

A wider, longer micro-slot to create a more expansive high energy area of clubface resulting in a higher flight and faster ball speeds.

INCREASED BOUNCE ANGLE

Increased by a degree in the long irons and 2 degrees in the scoring irons for improved turf interaction.

WRAP AROUND SOLE GRIND

MIZUNO T24 WEDGES - DENIM COPPER FINISH

Grain Flow Forged in Hiroshima Japan, to ensure precise shaping and an unrivalled touch around the green. Now with higher spinning QUADCUT+ grooves and five unique sole profiles.

FORGED IN HIROSHIMA JAPAN

One-piece Grain Flow Forged HD Boron in Hiroshima, Japan – where Mizuno irons have been produced since 1968.

QUADCUT+ GROOVES

An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.

CRAFTSMAN REFINED TOPLINE

Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area.

WET WEATHER PERFORMANCE

Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.

WRAP-AROUND SOLE RELIEF

Increased sole relief to heel and toe across all 5 grind options.

LOFT SPECIFIC PROFILE

Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).

SPIN-WEIGHTED BLADE DESIGN

A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface.

The Mizuno M.CRAFT OMOI #3 Putter is a full mallet thats Face Balanced with full shaft offset.

Forged from premium 1025 carbon steel and CNC milled, using all the successful fundamentals of the original M-Craft models, the OMOI putters feature a heavier head weight to increase MOI for improved stability.

The OMOI achieved its new stability by taking a view of the entire club – balancing out the increased head weight with a lighter weight grip and shaft to shift the club’s CG and help control face rotation through the putting stroke.

Every putter also comes with an additional weight kit – including a pair of 3g and 13g weights interchangeable with the 8g fitted as standard.

FEATURES AND BENEFITS:

• Forged and CNC Milled from 1025 mild carbon steel
  For incredible precision and feel. Deep face milling creates a softer feel and pure roll. 
• Heavier head weight with dual weight ports 
  At a weighty 370 grams (#1, #2) and 383 grams (#3), OMOI putters offer increased MOI for added stability.
• Additional weights allow for fine-tuning of swing-weight
  Includes two 3-gram weights, two 13-gram weights and a tool.  Interchangeable with the 8-gram fitted weights. 
• Available in three finishes
  Choose from three stunning finishes: New Double Nickel, bold Blue ION or intense Black ION.
• Lights out. Black Out. 
  With KBS Tour Black Ion-plated shaft, Lamkin OMOI Sink Fit Pistol grip and upgraded blacked-out M.Craft headcover. 

Consistently Mizuno’s most-played iron model in professional golf and still one-piece Grain Flow Forged in Hiroshima Japan, the JPX923 Tour adds a copper underlay for an even smoother sensation at impact.

NEW V-CHASSIS ENABLES A THINNER TOPLINE

Engineered via Mizuno’s ‘Harmonic Impact Technology’ project to create ‘muscleback’ type vibrations and feel from a cavity design. Prior models required a slightly thicker topline to maintain feel.

SOFT COPPER UNDERLAY

A microlayer of copper between the base Nickel and outer Chrome for legendary feel. Made famous in the iconic TN87.

CLEANER TURF INTERACTION

A generously rolled trailing edge enables versatility and immaculate turf interaction.

REFINED SCORING IRONS

Noticeably shorter blade length and more compact from 6 iron to GW for precision where most needed.

WHITE-SATIN BRUSH

Non reflective, Chrome plated finish to reduce bright light glare.

FORGED IN HIROSHIMA JAPAN

One-piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's iconic facility in Hiroshima, Japan – where Mizuno irons have been produced since 1968.

MIZUNO PRO 243 - TOUR SPEED

The Mizuno Pro 243 is a manufacturing masterpiece – more compact and precise than its predecessor, yet faster from the face and more satisfying at impact.

Improvements in performance only made possible through the long-term relationship between Mizuno’s R&D team and its exclusive Grain Flow Forging plant in Hiroshima, Japan.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

From a single billet at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the sensational feel of our Grain Flow Forged heads. Applied to closely match the vibration patterns identified with a soft muscle-back feel.

4120 CHROMOLY WITH FLOW MICROSLOT (4-7 IRON)

A wider, longer micro-slot to create a more expansive high energy area of clubface resulting in a higher flight and faster ball speeds.

INCREASED BOUNCE ANGLE

Increased by a degree in the long irons and 2 degrees in the scoring irons for improved turf interaction.

WRAP AROUND SOLE GRIND

MIZUNO ST-Z DRIVER - STRAIGHT - LOW SPIN

The Next Generation

With a balanced toe/heel carbon construction and central back weight, Mizuno's ST-Z driver encourages a low spinning, efficient straight ball flight. The modern ground hugging 460cc profile is both confidence inspiring and appealing to elite players. While a heavier 20-gram back weight creates a deeper centre of gravity for more efficient performance, more often.

ST-Z 220 DRIVER SPECIFICATION

Dexterity:
ST-Z 220 9.5 RH & LH
ST-Z 220 10.5 RH Only

MIZUNO PRO FLI-HI - TOUR LONG IRON

The Mizuno Pro Fli-Hi has become a fixture with the majority of Mizuno’s tour players. An easy launching, powerful long iron replacement that flows seamlessly into either the Mizuno Pro 241, 243 or 245 full iron set.

With a chassis now fully upgraded to 4335+ Nickel Chromoly for elevated ball speeds.

INTERNAL TUNGSTEN WEIGHTING

23 grams of weight low in the head for elevated launch compared to traditional long irons.

NICKEL CHROMOLY 4335+ HOLLOW BODY CONSTRUCTIONS

Utilizing a heat-treated multi-thickness face for elevated average ball speeds, with a more pliable body and bendable hosel.

OFFSET FACE WELD

Placing the weld line inside the upper face-gauge allowed a thinner topline. On the bottom edge, the weld line is back from the face, allowing greater flex and ball speeds from low on the face.

BLACK ION FINISH

Fully blacked-out plating creates the illusion of a more compact profile.

MIZUNO PRO 245 - TOUR SPEED AND LAUNCH

The Mizuno Pro 245 is measurably quicker again from the face than the Mizuno Pro 243 but also easier to launch – due to a complex hollow body construction and internally suspended Tungsten weight.

Packed into a staggeringly sleek chassis, the Mizuno Pro 245 showcases more than any model how rapidly Mizuno’s Grain Flow Forged process has evolved.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

One piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

HOLLOW BODY GFF 4135 CHROMOLY FACE AND NECK (2-8 IRON)

With multi-thickness face configuration and laser welded 431 Stainless steel back piece for elevated ball speeds and launch.

INTERNAL TUNGSTEN WEIGHTING (2-7 IRON)

A 46g Tungsten weight is key to delivering improved launch, but is suspended to enable the sole to flex (key to faster ball speeds).

SOFT COPPER UNDERLAY

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the sensational feel of our Grain Flow Forged heads.

MIZUNO JPX-925 HOT METAL HL IRONS

The JPX925 Hot Metal HL redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable.

MAXIMUM SPEED, MAXIMUM HEIGHT

The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a maximum launch and spin, the Hot Metal HL offers the same advanced technology in a wider, easier to elevate package.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO PRO 241 - CENTRE MUSCLE

The Mizuno Pro 241 is a pure shot-makers muscle-back with mass accumulated centrally behind impact.

A result of the pursuit of fine design details made possible through the long-term relationship between Mizuno’s R&D team and its exclusive Grain Flow Forging plant in Hiroshima, Japan.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

One piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

SOFT COPPER UNDERLAY

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the feel of our Grain Flow Forged heads.

CENTRE MASS FOR ENHANCED FEEDBACK

Delivers a softer, longer sensation at impact-matching vibration patterns identified by MIzuno's Harmonic Impact Technology and confirmed through extensive tour testing.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO JPX-925 HOT METAL PRO IRONS

The JPX925 Hot Metal Pro redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable. The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a more compact profile, the Hot Metal Pro offers the same advanced technology in a sleeker, more refined package.

MAXIMUM SPEED, SLIMMER PROFILE

The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a more compact profile, the Hot Metal Pro offers the same advanced technology in a sleeker, more refined package.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO PRO 241 - CENTRE MUSCLE

The Mizuno Pro 241 is a pure shot-makers muscle-back with mass accumulated centrally behind impact.

A result of the pursuit of fine design details made possible through the long-term relationship between Mizuno’s R&D team and its exclusive Grain Flow Forging plant in Hiroshima, Japan.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

One piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

SOFT COPPER UNDERLAY

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the feel of our Grain Flow Forged heads.

CENTRE MASS FOR ENHANCED FEEDBACK

Delivers a softer, longer sensation at impact-matching vibration patterns identified by MIzuno's Harmonic Impact Technology and confirmed through extensive tour testing.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

STRAIGHT, STABLE AND HIGH LAUNCHING

CORTECH CHAMBER

HIGH ENERGY MAS1C STEEL FACE

Reworked with a new multi-thickness design – made possible through the face support of Mizuno’s CORTECH Chamber.

WAFFLE CROWN AND THICK SOLE WEIGHT

Engineered to create a low sweet spot and deep centre of gravity, for high stable launch and efficient spin rates.e.

QUICK SWITCH HOSEL

4 degrees of adjustability.

SHAFT SPECS - UST Lin-Q Blue 75

Consistently Mizuno’s most-played iron model in professional golf and still one-piece Grain Flow Forged in Hiroshima Japan, the JPX923 Tour adds a copper underlay for an even smoother sensation at impact.

NEW V-CHASSIS ENABLES A THINNER TOPLINE

Engineered via Mizuno’s ‘Harmonic Impact Technology’ project to create ‘muscleback’ type vibrations and feel from a cavity design. Prior models required a slightly thicker topline to maintain feel.

SOFT COPPER UNDERLAY

A microlayer of copper between the base Nickel and outer Chrome for legendary feel. Made famous in the iconic TN87.

CLEANER TURF INTERACTION

A generously rolled trailing edge enables versatility and immaculate turf interaction.

REFINED SCORING IRONS

Noticeably shorter blade length and more compact from 6 iron to GW for precision where most needed.

WHITE-SATIN BRUSH

Non reflective, Chrome plated finish to reduce bright light glare.

FORGED IN HIROSHIMA JAPAN

One-piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's iconic facility in Hiroshima, Japan – where Mizuno irons have been produced since 1968.

MIZUNO T24 WEDGES - SATIN WHITE FINISH

Grain Flow Forged in Hiroshima Japan, to ensure precise shaping and an unrivalled touch around the green. Now with higher spinning QUADCUT+ grooves and five unique sole profiles.

FORGED IN HIROSHIMA JAPAN

One-piece Grain Flow Forged HD Boron in Hiroshima, Japan – where Mizuno irons have been produced since 1968.

QUADCUT+ GROOVES

An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.

CRAFTSMAN REFINED TOPLINE

Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area.

WET WEATHER PERFORMANCE

Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.

WRAP-AROUND SOLE RELIEF

Increased sole relief to heel and toe across all 5 grind options.

LOFT SPECIFIC PROFILE

Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).

SPIN-WEIGHTED BLADE DESIGN

A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface.

The Mizuno M.CRAFT OMOI #1 Putter is a slant neck blade with 60-degrees of toe hang and ¾ shaft offset.

Forged from premium 1025 carbon steel and CNC milled, using all the successful fundamentals of the original M-Craft models, the OMOI putters feature a heavier head weight to increase MOI for improved stability.

The OMOI achieved its new stability by taking a view of the entire club – balancing out the increased head weight with a lighter weight grip and shaft to shift the club’s CG and help control face rotation through the putting stroke.

Every putter also comes with an additional weight kit – including a pair of 3g and 13g weights interchangeable with the 8g fitted as standard.

FEATURES AND BENEFITS: 

• Forged and CNC Milled from 1025 mild carbon steel
  For incredible precision and feel. Deep face milling creates a softer feel and pure roll. 
• Heavier head weight with dual weight ports 
  At a weighty 370 grams (#1, #2) and 383 grams (#3), OMOI putters offer increased MOI for added stability.
• Additional weights allow for fine-tuning of swing-weight
  Includes two 3-gram weights, two 13-gram weights and a tool.  Interchangeable with the 8-gram fitted weights. 
• Available in three finishes
  Choose from three stunning finishes: New Double Nickel, bold Blue ION or intense Black ION.
• Lights out. Black Out. 
  With KBS Tour Black Ion-plated shaft, Lamkin OMOI Sink Fit Pistol grip and upgraded blacked-out M.Craft headcover. 

M-CRAFT OMOI SPECIFICATION

MIZUNO ST-G 220 DRIVER

GRAVITY-ADJUSTABLE DESIGN

A player’s deeper profile with the ball speed of Mizuno's Forged BETA Ti SAT2041 clubface - and unmatched levels of adjustability for precise fitting. The ST-G now has shorter lateral weight tracks - allowing a new centre/back weight port. The combination of three tracks and two moveable weights enable the ST-G to morph from ultra-low spinning bomber to a highly playable mid-spinning option – with fade or draw bias in both.

EXPANDED ADJUSTABILITY

ST-G 220 DRIVER SPECIFICATION

Stock Shaft: Project X Hzrdus Smoke Black RDX 60

Stock Grip: Lamkin ST Hybrid 360

MIZUNO JPX-925 HOT METAL INDIVIDUAL IRONS

The JPX line allows us to approach design in a whole new way, thinking about the future and experimenting with advanced technologies and materials. This forward-thinking mindset enables us to challenge conventions in every category of clubs—irons, drivers, and more. And even with this innovative approach, we continue to deliver the exceptional look and feel that makes Mizuno golf clubs so special.

MAXIMUM SPEED, MAX CONSISTENCY

The JPX925 Hot Metal redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable. The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO ST-MAX 230 DRIVER. MAX MOI. MAX STABILITY

A low profile, wide footprint driver that looks noticeably larger than its measured 460cc. An expanded CORTECH Chamber and 54 grams of back weighting combine to create Mizuno’s most stable ever driver, with exceptional straight-line performance across its wide, inviting clubface.

The ST MAX 230 driver unveils two new engineering enhancements to ensure that stability is backed with impressive ball speeds – a next generation CORTECH Chamber and new Bet rich LFS Ti clubface.

Delivering an impressive ball flight that stays on whatever line you set it.

NEW BETA RICH TI LFS

A new lighter, faster face material – measuring 9% higher in tensile strength (compared to SAT2041) for a complex multi-thickness face geometry. First introduced on Mizuno’s 2024 Tour driver the ST-G 440cc.

MAX STABILITY

Wide profile, large footprint with wrap around toe composite for extreme twist resistance to off centre strikes and a straight, predictable ball flight.

EXPANDED CORTECH CHAMBER

MIZUNO ST-X DRIVER - DRAW BIAS - MID SPIN

The Next Generation

A confidence-inspiring, draw-biased driver with heel focussed weight location. The ST-X will appeal to players seeking a higher, right to left ball flight. With higher spin rates than its ST-Z counterpart, the ST-X, will suit moderate swing speeds, needing help producing a more extended ball flight. A new 20-gram heel biased back weight creates a deeper centre of gravity for more efficient, longer drives- more often. Also available as a J-Spec option with ultra -lightweight HeLIUM NanoCore shaft for seniors and slower swing speeds.

ST-X 220 DRIVER SPECIFICATION

Dexterity: RH Only

MIZUNO ST-Z DRIVER - STRAIGHT - LOW SPIN

The Next Generation

With a balanced toe/heel carbon construction and central back weight, Mizuno's ST-Z driver encourages a low spinning, efficient straight ball flight. The modern ground hugging 460cc profile is both confidence inspiring and appealing to elite players. While a heavier 20-gram back weight creates a deeper centre of gravity for more efficient performance, more often.

ST-Z 220 DRIVER SPECIFICATION

Dexterity:
ST-Z 220 9.5 RH & LH
ST-Z 220 10.5 RH Only

Mizuno Pro 223 Iron Set 4-PW - Right Hand

Shaft: Dynamic Gold 105 S300 - Stiff Flex

Lie: 1 Degree Flat

Grip: GP Tour Velvet

Condition: 9/10

MIZUNO JPX-925 HOT METAL PRO IRONS

The JPX925 Hot Metal Pro redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable. The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a more compact profile, the Hot Metal Pro offers the same advanced technology in a sleeker, more refined package.

MAXIMUM SPEED, SLIMMER PROFILE

The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a more compact profile, the Hot Metal Pro offers the same advanced technology in a sleeker, more refined package.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO JPX-925 HOT METAL HL IRONS

The JPX925 Hot Metal HL redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable.

MAXIMUM SPEED, MAXIMUM HEIGHT

The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a maximum launch and spin, the Hot Metal HL offers the same advanced technology in a wider, easier to elevate package.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO JPX-925 HOT METAL PRO IRONS - GRAPHITE

The JPX925 Hot Metal Pro redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable. The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a more compact profile, the Hot Metal Pro offers the same advanced technology in a sleeker, more refined package.

MAXIMUM SPEED, SLIMMER PROFILE

The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a more compact profile, the Hot Metal Pro offers the same advanced technology in a sleeker, more refined package.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO JPX-925 HOT METAL IRONS - GRAPHITE

The JPX line allows us to approach design in a whole new way, thinking about the future and experimenting with advanced technologies and materials. This forward-thinking mindset enables us to challenge conventions in every category of clubs—irons, drivers, and more. And even with this innovative approach, we continue to deliver the exceptional look and feel that makes Mizuno golf clubs so special.

MAXIMUM SPEED, MAX CONSISTENCY

The JPX925 Hot Metal redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable. The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO JPX-925 HOT METAL IRONS

The JPX line allows us to approach design in a whole new way, thinking about the future and experimenting with advanced technologies and materials. This forward-thinking mindset enables us to challenge conventions in every category of clubs—irons, drivers, and more. And even with this innovative approach, we continue to deliver the exceptional look and feel that makes Mizuno golf clubs so special.

MAXIMUM SPEED, MAX CONSISTENCY

The JPX925 Hot Metal redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable. The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO PRO 243 - TOUR SPEED

The Mizuno Pro 243 is a manufacturing masterpiece – more compact and precise than its predecessor, yet faster from the face and more satisfying at impact.

Improvements in performance only made possible through the long-term relationship between Mizuno’s R&D team and its exclusive Grain Flow Forging plant in Hiroshima, Japan.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

From a single billet at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the sensational feel of our Grain Flow Forged heads. Applied to closely match the vibration patterns identified with a soft muscle-back feel.

4120 CHROMOLY WITH FLOW MICROSLOT (4-7 IRON)

A wider, longer micro-slot to create a more expansive high energy area of clubface resulting in a higher flight and faster ball speeds.

INCREASED BOUNCE ANGLE

Increased by a degree in the long irons and 2 degrees in the scoring irons for improved turf interaction.

WRAP AROUND SOLE GRIND

MIZUNO PRO 241 - CENTRE MUSCLE

The Mizuno Pro 241 is a pure shot-makers muscle-back with mass accumulated centrally behind impact.

A result of the pursuit of fine design details made possible through the long-term relationship between Mizuno’s R&D team and its exclusive Grain Flow Forging plant in Hiroshima, Japan.

GRAIN FLOW FORGED HD IN HIROSHIMA, JAPAN

One piece Grain Flow Forged HD from 1025E Pure Select mild carbon steel at Mizuno's exclusive facility - where Mizuno irons have been produced since 1968.

SOFT COPPER UNDERLAY

A microlayer of copper beneath Nickel Chrome - an additional touch to enhance the feel of our Grain Flow Forged heads.

CENTRE MASS FOR ENHANCED FEEDBACK

Delivers a softer, longer sensation at impact-matching vibration patterns identified by MIzuno's Harmonic Impact Technology and confirmed through extensive tour testing.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO ST-X HYBRIDS - DRAW BIAS - HIGH LAUNCH

The Next Generation

A confidence inspiring hybrid – engineered to produce a higher, draw biased flight. The ST-X hybrids are suited for moderate swing speed players who need elevated launch to reach both their optimal distance and controlled landing angles.

High Draw Flight bias

Mizuno’s X-Axis design – ultra light waffle crown, with deep internal weighting, encourages a high draw biased flight.

High ball speed MAS1C face

At 1.8mm Mizuno’s thinnest hybrid face to date – with the highest recorded ball speeds from centre strikes (compare to previous ST-X and CLK).

Engineered for ‘solid’ feel

Mizuno's Harmonic Impact Research identifies and isolates vibration patterns that elite players associate with a preferred 'solid' feel. Knowledge of exact, preferred vibrations allows Mizuno to build sound into the design.

Optimized Wave Sole

Hybrid specific design helps create higher ball speeds from low on the face – suited to strikes directly from the turf.

ST-X 220 HYBRID SPECIFICATION

Dexterity: RH Only

Mizuno S23 Satin Wedge 56.10D - Right Hand - Demo Used

Shaft: DG Tour Issue S400

Grip: GP Z Grip

Condition: 9.5/10

Mizuno S23 Satin Wedge 52.10S - Right Hand - Demo Used

Shaft: DG Tour Issue S400

Grip: GP Z Grip

Condition: 9.5/10

MIZUNO JPX-925 HOT METAL PRO IRONS

The JPX925 Hot Metal Pro redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable. The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a more compact profile, the Hot Metal Pro offers the same advanced technology in a sleeker, more refined package.

MAXIMUM SPEED, SLIMMER PROFILE

The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a more compact profile, the Hot Metal Pro offers the same advanced technology in a sleeker, more refined package.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

Mizuno JPX-923 Tour 6 Iron Only - Right Hand

Shaft: Nippon NS Pro Modus Tour 115 - Stiff Flex

Grip: Lamkin Crossline 360

Condition: 9/10

MIZUNO JPX-925 HOT METAL INDIVIDUAL IRONS

The JPX line allows us to approach design in a whole new way, thinking about the future and experimenting with advanced technologies and materials. This forward-thinking mindset enables us to challenge conventions in every category of clubs—irons, drivers, and more. And even with this innovative approach, we continue to deliver the exceptional look and feel that makes Mizuno golf clubs so special.

MAXIMUM SPEED, MAX CONSISTENCY

The JPX925 Hot Metal redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable. The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO JPX-925 HOT METAL HL IRONS

The JPX925 Hot Metal HL redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable.

MAXIMUM SPEED, MAXIMUM HEIGHT

The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a maximum launch and spin, the Hot Metal HL offers the same advanced technology in a wider, easier to elevate package.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.

MIZUNO JPX-925 HOT METAL HL IRONS

The JPX925 Hot Metal HL redefines the performance of an already industry-leading franchise. Combining the power and speed of Nickel Chromoly with a newly engineered CORTECH Design featuring a Contour Ellipse face, the consistency of distance across the entire impact zone has never been as long and predictable.

MAXIMUM SPEED, MAXIMUM HEIGHT

The addition of tungsten weighting low in the head adds a height and landing angle element that makes hitting precise shots into greens easier than ever. Designed for golfers seeking a maximum launch and spin, the Hot Metal HL offers the same advanced technology in a wider, easier to elevate package.

CORTECH DESIGN FEATURING CONTOUR ELLIPSE FACE

A completely re-engineered multi-thickness face profile, pushing to the extremes with a 30% thinner face than the previous generation. The Contour Ellipse enhances center ball speed and ensures maximum speed retention throughout the impact zone.

MULTI-MATERIAL CONSTRUCTION WITH TUNGSTEN WEIGHTING

Tungsten positioned low in the 4-7 irons creates a higher launch with a lower sweet spot, producing a steeper landing angle.

SEAMLESS CUP FACE

One-piece Cup Face geometry with thinned areas revolving 360 degrees around the perimeter, increasing rebound area for maximum ball speed across the entire face.

AGGRESSIVELY TAPERED BLADE

A more obvious tapering of the upper blade potion delivers an ideal trajectory through the set – with flighted long irons and penetrating short irons.